BSI-107 Insta-Cure+ Medium CA Glue 1oz
BSI-107: 1 oz. (28.4 g)
*Adhesives Glue, Liquids, Paint and other flammable liquids will only ship domestic ground shipping. No International shipping items will be cancelled out of order.
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
BSI-107 Insta-Cure+ Medium CA Glue 1oz
BSI-107: 1 oz. (28.4 g)
*Adhesives Glue, Liquids, Paint and other flammable liquids will only ship domestic ground shipping. No International shipping items will be cancelled out of order.
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
BSI-107: 1 oz. (28.4 g)
*Adhesives Glue, Liquids, Paint and other flammable liquids will only ship domestic ground shipping. No International shipping items will be cancelled out of order.
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
